Pegasus™ 2

The Pegasus 2 has three user-selectable six second flash patterns; the first code pattern is a fixed flash rate code identical to the Phoenix Jr. (NSN: 5855-01-438-4588), the second code pattern is a International Morse Code signal (S - O - S) and the third is installed as needed by the user in the field.

The operator programs a user defined flash pattern via two programming pins. Miniature indicator lights within the device will flash the pattern as it is being recorded by the user to confirm the code being stored. The operator can easily switch between each of the encoded flash pattern via the programming pins. All codes are stored in a nonvolatile memory allowing the battery to be removed from the beacon without erasing any of the entered codes. During operation, the user can reactivate the miniature indicator lights at anytime allowing the operator to visually confirm the broadcast code in situations where their own night vision equipment has become lost or damaged.

SPECIFICATIONS
Weight: 1 Ounce | 28 Grams
Size: 1.24" x 0.9" x 0.574" | 31mm x 22.5mm x 14.6mm
Flash Repeat Cycle: Programmable
Flash Duration: Programmable
Code Memories: Three; Phoenix Jr. fixed flash rate, International Morse Code signal, and user defined.
Battery: Common 9 volt
Configuration:3 Light Emitting Diodes (LED)
Coverage: 240 degrees x 360 degrees
Switching: Attach or remove battery, control pins
Operating depth: The Poseidon - Phoenix / Pegasus Mounting Clip (902801) provides a water tight casing for the beacon and battery assembly. If immersed without the Poseidon case, the unit will continue to operate until the contacts fail due to water and electrolytic corrosion. Given these conditions the depth limitation is solely determined by the battery's ability to withstand depth.

Alternate frequencies available on request

Datasheet:  Pegasus™ 2